Toyota/Scion/Lexus

Diagnostic Scantool & Special Service Tools

 

 

Call

·          OTC Division of SPX Corp at (800) 933-8335 (Special Service Tools)

  • Toyota/Lexus Approved Dealer Equipment at (800) 368-6787 (Scantool)

Service & Collision Repair Information

 

 

For web based service information, go to the Toyota/Lexus Technical Information System (TIS) website at techinfo.toyota.com OR techinfo.lexus.com for all Toyota, Scion & Lexus vehicles. This website contains all service information back to 1990 models and TSB’s back to 1987 models. The website also contains accessory & audio information, VIN decoders, maintenance schedules and collision repair information. The website offers electronic access to technical training information, access to an "on-line" Special Service Tool catalog and all information necessary to purchase service and training items not available in electronic format.

For paper based service information, and all other service support materials not available electronically on TIS, call the Toyota Material Distribution Center at (800) 622-2033. A catalogue of available materials is available on the TIS website homepage.

NOTE: Both collision and body information is included in the collision repair manual.

 

TIS techstream - Scantool

 

Call Approved Dealer Equipment at 1-800-368-6787

 

TIS techstream is the replacement for the Diagnostic Tester. It combines the functionality of the TIS service information system with factory scantool software in a single portable device. With TIS techstream, technicians can simultaneously view/analyze on-board vehicle data, browse relevant TIS service documents, and reprogram vehicles all from the driver's seat via wireless connection to TIS.

Scantool Diagnostics

TIS techstream offers full support for 1989 – current model vehicles. Periodic software updates will be available to support new models. TIS techstream provides quick and easy access to all available systems on the vehicle as well as a one touch vehicle status report (Health Check).

 


Powertrain Reprogramming 

Beginning with some 2001 models and expanding to all models by 2007, Toyota/Scion/Lexus vehicles have flash reprogrammable powertrain ECMs.

Reprogramming is only performed if a Technical Service Bulletin or Service Campaign provides direction to do so. Flash reprogramming can be accomplished using a scantool or a PC and a "Toyota validated" J2534-1 interface.

Scantool Reprogramming

 

Toyota/Scion/Lexus ECMs can be reprogrammed using either TIS techstream, Techstream Lite, previous Toyota/Lexus factory Diagnostic Tester, or the Vetronix Mastertech scantool. The ECM reprogramming function is only available with the authentic Toyota factory scantool software which runs on either of the above mentioned scantools. Please reference the following link for more information: TIS Techstream

 

Toyota Diagnostic Tester Scantool / Vetronix Mastertech

The Toyota Diagnostic Tester scantool can be used for all flash reprogrammable Toyota/Scion/Lexus ECMs, 2001 through April 2007. The Diagnostic Tester Scantool in not recommended for service reprogramming operations introduced after April 2007.  Please reference the following link for more information: Toyota Diagnostic Tester Scantool / Vetronix Mastertech

 

NOTE: The Toyota Diagnostic Tester is no longer supported and replacement parts are not available from Toyota. The last software release for the Toyota Diagnostic Tester was version 14.1 and was issued in April 2007. Version 14.1 will provide diagnostic support through the 2007 Model Year and reprogramming support for calibration files released up to April 2007.

 

J2534 Reprogramming

All Toyota/Scion/Lexus ECMs that can be reprogrammed with a scantool can also be reprogrammed using a PC and "Toyota validated" J2534-1 interface.  Go to techinfo.toyota.com or techinfo.lexus.com and follow the link entitled Scan Tools & Vehicle Reprogramming for more information. TOYOTA RECOMMENDS USING ONLY VALIDATED INTERFACES THAT APPEAR ON THIS LIST.

 

Home